The past two evenings I've had problems with imaging after successful meridian flips. After the flip, the confirm slew to the plate solved image causes the program to freeze. The problem can be seen at 4:15 AM on Sept. 28th. Here's the log: https://www.dropbox.com/home/Jerald%20Astro?preview=sg_logfile_20160927190802.txt. Thanks for any help....Gunny
PS I should add that I am using the 10 u mount and I did notice on the hand controller the symbol for tracking limit being reached. This has never happened before, and it stops the mount from moving further. I have flip slew tolerance set to 3 degrees and flip guide tolerance set to 5 degrees. Auto meridian flip is ON, along with auto center in SGP. Day time testing shows no problems with being able to do the flip. This is also confirmed by last nights log.