Does not react
Try use SX Version 1.2.2.0 native driver. I've had issues with versions 1.3.x.x because sometimes it would time out and stop communicating. Many others have reported similar issues. Even though SGP...
View ArticleCan SGP Control the Paramount Focus Port?
Thanks. I assumed as much. As for focusers, I have several absolute stepper motors. I'm chasing a completely different tail with this project, so I'd like to be able to control the DC ones as well....
View ArticleDoes not react
HiI do not have a trius , but I thought it was only a hub on the back I will ask Terry of SX and see if he has any ideas Harry
View ArticleDoes not react
Oh BTW I have 2 sx cameras and SGP can connect to them both at the same time ? Harry
View ArticleDoes not react
HiTerry of SX does not see why SGP can not work with 2 cameras As I can do so , can you give a bit more info i.e what ascom drivers you are using etc Regards Harry
View ArticleTroubles with Moonlite Rotator
(Long delay... I've been travelling for work.) Thanks, Chris. I believe you must be right; and that makes all this make sense. Let me see if I can get the rotator defined properly and then test again....
View ArticleDoes not react
My deliverer: DutchDigitalImaging says that Terry has said that SGP can not handle two SX cameras. My experience is that it always brings trouble: SGP does not react anymore... I used the drivers for...
View ArticleClik here to view.
Does not react
HiI have spoken to Terry , it was true a while ago when the ascom driver was in a early state more than one camerawas a problem , but not now You mention the native sx drivers which is fine , but you...
View ArticleNikon d7100 error [kNkMAIDResult_NotSupported]
Hi Ken, I have tried with v2.5.2.0 and 2.5.2.1 beta however the same error occurs, timeout whilst downloading plate solve frame. sg_logfile_20160915214932.txt (47.2 KB)
View ArticleDoes not react
You need ASCOM driver for SGP for main camera but you don't need ASCOM driver for PHD2 for Lodestar. PHD2 works very well with SX native driver. Try use ASCOM driver for main camera with SGP and SX...
View ArticleSGP Autofocus vs PHD2
Also do not forget to do a bad pixel map or darks in phd2 for your guide cam. It will reduce any chances of phd auto select guide star from choosing a hot/stuck pixel as the guide star.
View ArticlePlate solve after flip
Moved to public forum... From @Moosmann: We are quite sure about having correct settings for flip now (we had the Problem that the older ascom Driver did somehow come to use, so we deinstalled it). We...
View Article2.5.2.1 - Image history and marking as Bad
Thanks Ken. Just to be clear, do you mean 2.5.2.2?
View ArticleClik here to view.
Nikon d7100 error [kNkMAIDResult_NotSupported]
Anaida: the same error occurs, timeout whilst downloading plate solve frame. All other frames work? Like if you click "Take One" with an exposure time < 30 sec? Also, do you have the logs for...
View ArticleClik here to view.
2.5.2.1 - Image history and marking as Bad
HomerPepsi: Just to be clear, do you mean 2.5.2.2? Sure... that sounds reasonable. It's not versioned yet, but that is very likely the version of the next beta.
View Article2.5.2.1 - Image history and marking as Bad
No rush. It doesn't cause crash at the moment (for myself at least).
View ArticlePlateSolve2 Falis to launch...Sometimes
Hi Ken, just an update. Definitely not the beta. There might some cabling issues causing some balance problems that just started cropping up. Cleaned it up a bit. Going to see if it fixes the issue...
View ArticleMeridian Flip failure
@topboxman: Maybe try imaging without APCC. The version being run is a beta so one could make a case that it might be worthwhile to wait until any issues are worked out. That said, this would be a...
View ArticleClik here to view.
Meridian Flip failure
Yep, I'm not going anywhere soon. So far, I'm good with planning my meridian flips to occur while I'm still awake Next time out, I'll try the long wait time to see if that helps. Gabe
View Article