Autocenter fails after EQMOD meridian flip
here's the link to the log file. The flip occurred at 23:07https://www.dropbox.com/s/ncoyv357gslcfjw/sg_logfile_20160423160937.txt?dl=0
View ArticleAutofocus, Plate solving, and guiding
I've been playing around with a trial copy of SGP for 6 days and have run into a situation a couple of times. When the sequence starts, SGP slews the telescope to the target and runs plate solving to...
View ArticleRunning a Sequence
When I run a practice sequence with everything connected via ASCOM, the sequence starts, and immediately I get a information box saying that if I don't uncheck the box, the end of sequence options...
View ArticleRunning a Sequence
Happened to me the first time. Do you have your targets "checked" in the sequence?
View ArticleAutocenter fails after EQMOD meridian flip
I had lots of trouble also...........setting the Past Meridian Flip as far as possible past 1 is one idea , mine is 8, that might get you closer to start with after the Flip ( do this only if safe...
View ArticleAutofocus, Plate solving, and guiding
No. The auto focus routine requires you to be roughly in focus when it runs the first time and if you're roughly in focus you'll be good enough to do plate solving. You can add 'notes' that pop up...
View ArticleAutocenter fails after EQMOD meridian flip
http://mainsequencesoftware.com/Content/SGPHelp/SequenceGeneratorPro.html?UsingEQMODwithSGPro.html Did you follow this checklist? Are you using an EQDIR module? I tried helping someone with EQMOD and...
View ArticleRunning a Sequence
Post your logs and sequence file. You need to have something for SGP to do even if you're using the simulators.
View ArticleRunning a Sequence
I can send the log file...where is the sequence file located? How do I 'post' the log file? It's huge.
View ArticleAutocenter fails after EQMOD meridian flip
Have you checked for cone error?If your scope is not parallel to the mount axis, a meridian flip will double any error.
View ArticleAutocenter fails after EQMOD meridian flip
Yes I followed the checklist and yes I am using EQDIR. The flip works perfectly, and I can see from Cartes du Ciel that the scope was pointing correctly at the target after the flip. The issue is only...
View ArticleRunning a Sequence
Dropbox. Sequence file should be in your documents folder. Did you actually have a target created and lights selected when you did this? We can probably figure this out without those files.
View ArticleRunning a Sequence
I do have a target created and lights selected. I have a sequence file. I have installed all of the ASCOM drivers for my real stuff (Starlight Xpresss camera), Starlight Xpress Filter Wheels, PHD...
View ArticleRunning a Sequence
Is it mandatory that the scope be aligned? I have everything connected and running, but it is not aligned and not aiming at anything. I assumed that I could still see if the process worked without...
View ArticleRunning a Sequence
it appears that the guider never settles,,,,that is why it stops. I will try to run the sequence with NO autoguider selected.
View ArticleRunning a Sequence
that apparently was the problem....when I disconnected the autoguider, all works fine now.
View ArticleAutocenter fails after EQMOD meridian flip
are you using the latest version of SGP ?? I think they improved the centering routine.
View ArticleAutocenter fails after EQMOD meridian flip
I'm on 2.15.1.17 which the version check says is the latest
View Article