Clik here to view.
IC 1795 The Fishhead Nebula NB Image
Thanks Brendan...... Having been imaging at 0.66 arcsec/px I totally get where you are coming from with regards to needing ideal conditions. I look forward to more images with this setup
View ArticleSomething wrong with DSLR RAW exposures
Hi. I've actually noticed this as well. I can take an image with BYEOS then disconnect and connect SGP and take an image with the same setting. If I open both raw images in PixInsight the BYEOS image...
View ArticleDisable "Analyzing Star Data?"
I'M having the same trouble. I'm using a 3.2 quad core laptop and SBIG 8300. My downloads are now taking 20-40 sec and laptop will even freeze at times during autofocus. Any fix
View ArticlePyxis Rotator Issues with 2.5.2.5
Greetings After my upgrade to 2.5.2.5 pyxis rotator does not seem to work. I am running pyxis commander 3.02 Downgrading to 2.5.2.4 works fine My thoughts The behavior may be related to "SGPro now...
View ArticleSlave to the telescope checkbox
Greetings Everytime I boot my sequence I have to check the slave to the telescope checkbox on the "other" tab under equipment It does not seem to persist between opening and closing SGP pro. It would...
View ArticleClik here to view.
Autocenter fails after EQMOD meridian flip
Chris: The plate solve before the meridian flip is what gives the exact position. The sync contributes nothing because it is immediately followed by the long meridian flip slew. What would help is to...
View ArticleClik here to view.
Disable "Analyzing Star Data?"
bcstein12: Any fix In the 2.5.2.5 beta, but just to turn it off, not to make is faster.
View ArticleClik here to view.
Pyxis Rotator Issues with 2.5.2.5
gorgi: I think that the rotator once it performs its function it disconnects. I don't understand this. Why would it do that?
View ArticleSlave to the telescope checkbox
You can set this in the slave settings. However it is on Sequence Start. It does not work on connect. http://mainsequencesoftware.com/Content/SGPHelp/SlaveSettings.html ThanksJared
View ArticlePyxis Rotator Issues with 2.5.2.5
Sorry I should have been more clear.I am not disconnecting. SGP or the driver seems to disconnect. My usually behaviorI connect to Pyxis through SGP. If the rotator is not homed It will not moveSo I...
View ArticleNIR Pre-flash
It doesn't appear that there's any way to utilize this feature on some of the cameras supported by SGP. I see there's support for scripting after events, but what about after each frame? Thanks
View ArticleNIR Pre-flash
Probably not externally. It really depends on if the camera is supported via ASCOM or natively. What camera are you wanting this support for? Thanks,Jared
View ArticleNIR Pre-flash
It would be any camera with the 16200 sensor, but specifically, I'm referring to a Moravian G3 16200. Banding is an issue (RBI) that can be fixed by preflashing before each exposure.
View ArticleNIR Pre-flash
Since Moravians are supported via ASCOM, they would need to add the option and address it in their ASCOM driver. Such options are not exposed to the client (SGP). Thanks,Jared
View ArticleClik here to view.
NIR Pre-flash
Moravian already does support preflash in the Ascom driver: I only just became aware of the banding while taking some 30min OIII subs. I didn't notice the banding before. There was a recent discussion...
View ArticleNIR Pre-flash
BTW, I've never encountered the need for RBI preflash before. What is a good setting?
View ArticleDSO Browser
I maybe missing something obvious, but how do I bring data into SGPro from DSO browser? Nigel
View ArticleClik here to view.
DSO Browser
ODD....I have just tried this for the first time too.....and it does not appear to work???
View ArticleDisable "Analyzing Star Data?"
Hey guys, we are back to normal operation with the 2.5.2.5 beta. Thanks for the quick response!
View Article